...
[wd_asp id=1]
Header
01252323077

Get Expert Brake Info in Aldershot

Call us now for an immediate quote
WhatsApp Now to chat with our team
Enter Your Registration to Get Started
UK
Ellipse-166.png
TOP RATED GARAGE
IN THE AREA
Ellipse-165.png
ORDER ONLINE FOR
SAME DAY FITTING
Ellipse-168.png
CERTIFIED
TECHNICIANS
Ellipse-167.png
OPEN SEVEN DAYS
A WEEK

Car Brake Checks & Replacement at GForce Tyres

Book Your Brake Inspection at GForce Tyres

If you’re worried about your car’s braking performance or need a check before a long drive, schedule an appointment at your local GForce Tyres centre.

Our skilled brake technicians will conduct a free, no-obligation brake inspection. Afterward, you’ll receive a detailed brake report and a quote for any necessary repairs.

Simply enter your vehicle registration here and click ‘Search.’

When Should You Have Your Brakes Inspected?

Watch for these signs indicating a brake inspection is needed:

Grinding: Car brakes grinding noise usually means the brake pads are worn down to the metal, potentially damaging the brake disc.

Squeaking: This can suggest a stuck brake caliper or worn brake pads with built-in wear indicators. Any squeaking should be inspected.

Pulsating: A pulsating brake pedal may indicate warped brake discs. If it happens only with firm braking, it could be the ABS engaging, but persistent pulsation should be checked.

Vehicle Pulling: If your vehicle pull out from one side during braking, it may be due to a stuck brake component. An inspection will identify the cause.

Sponginess: A spongy brake pedal indicates air in the brake lines, affecting brake fluid flow.

Soft Brake Pedal: A brake pedal that goes all the way to the floor suggests a serious issue, such as ineffective brake fluid or a master cylinder fault.

Brake Warning Light: A brake warning light often signals low brake fluid or a leak in the system. Read our blog for more details on what to do.

High Handbrake: A handbrake that pulls too high may need adjustment. Modern handbrakes should engage within 6 to 8 clicks.

Regular brake inspections are vital for maintaining vehicle safety and performance. Identifying problems early can help restore your brakes to optimal efficiency.

Old Brake Fluid: Brake fluid inspection is important because brake fluid should be replaced approximately every two years to maintain effectiveness. Over time, it absorbs moisture, which can impair braking performance.

GForce Tyres Brake Inspection

At GForce Tyres, we understand the importance of regular brake maintenance and are well aware about how to perform a brake inspection. Our team of over 600 brake specialists nationwide is committed to expert, cost-effective brake care.

What Does Our Brake Inspection Cover?

  • Preliminary Road Test: Initial road test to assess braking performance.
  • Brake Pedal: Test pedal travel and servo operation.
  • Pads & Shoes: Measure wear and check for damage.
  • Wheel Cylinder: Inspect for damage or fluid leaks.
  • Disc Brake Callipers: Check calipers, hoses, and pipes for damage or leaks.
  • Precision Inspection: Measure discs or drums for wear and report damage.
  • Handbrake: Evaluate the condition and functionality.
  • Brake Fluid: Assess fluid quality for proper lubrication and moisture levels.
  • Final Road Test: Confirm effective braking performance.

How Often Should Brakes Be Replaced?

Brake longevity varies with driving patterns. For example, highway driving might extend brake pad life up to 60,000 miles, while city driving could reduce it to around 25,000. Front brakes usually wear faster than rear brakes.

Brake pads should be replaced if the friction material wears down to 3 millimeters. Measure the brake disc thickness and replace it if it’s below the manufacturer’s minimum specification.

Although you can measure brake disc thickness, it’s complex and requires specialized equipment. It’s often best to leave this to the professionals.

During our disc brake inspection if we found anything complex and disc thickness we recommends replacing brake discs or drums in axle sets to avoid imbalance and premature wear. New parts should be driven gently for the first 200 miles to ensure proper bedding.

For drivers with high annual mileage (around 8,000 miles or more), we suggest checking your braking system at least twice a year, before long trips, or before your MOT. Remember, failing to meet brake standards can result in an MOT failure.

Book your brake check today at GForce Tyres and ensure your vehicle’s braking system is always at its best!

BOOK AN APPOINTMENT NOW

VISIT TODAY FOR A FREE BRAKE inspection.

CLICK HERE